ÍNDEX

Quick Release Hub

Paddle Shift

Hand Knob

Parachute Lever

Hook for Steering Wheels

Steering Wheel Spacer

Fixing Adapter

Button Support Plate

Buttons and Others

Spiraled Cables

SNAP-FIT VW and Mitsubishi Hub (Quick release)

Homologated by SFI

 

The Snap-fit ​​has the body made of Aluminum, which has two parts, one is the body that must be fixed to the steering wheel , the other is the pinion manufactured in Steel, which must be fixed to the steering rod of the vehicle . The locking system is for 3 beads.

 

SNF-VW  

Volkswagen - Golf until 98 / Fox until 95 / Beetle above 77)

Renault  - Clio until 2008

 

SNF-MI  

Mitsubishi - (L200 / Pajero / Eclispe / Lancer)

 

ATTENTION: The Snapfit is a piece intended for use on the Tracks.

 

Add Subtitles to the video in YouTube options.

 

SNAP-FIT UNIVERSAL Hub (Quick Release)

Homologated by SFI

 

The Snap-fit ​​is made of 100% aluminum, has two parts, one is the body that must be fixed to the steering wheel (gray trigger), the other is the pinion that has a base of 6 holes that must be fixed to the hub of the respective (see Hub Adapter List).

This Hub must be purchased separately, and may be manufactured by Lotse, or other manufacturers. The locking system is provided by 3 beads, and the locking takes place in the same position from which it was removed.

 

SNF-UN  (Hub Adapter must be purchased separately)

 

 

ATTENTION: The Snapfit is a piece intended for use on the Tracks.

 

 

 

NEW-STEP Paddle-Shifters

 

The NewStep is a Paddle-Shift system, which enables its application in many functions, by the simple 2-pole positive / negative system.

Among some of these performance related functions are: 2Step and 3Step, Line Lock, Bootser, Nitro, Shiter, among others. This new version is even more compact, robust and features finishing details that make it more closed, in addition to accompanying a CABLE FOR EASY INSTALLATION. Can be installed from a single side, or using two pieces if you have butterflies on both sides.

 

NST-PR  -  Black

 

Add Subtitles to the video in YouTube options.

INTERLAGOS Shift-knob

 

The Interlagos Shift-Knob is produced in 100% aluminum in gray, silvere and matte black colors, with 55mm of diameter. Its installation is universal and is fixed by 2 built-in screws.

 

INT-PR  -  Black

INT-CZ -  Silver

INT-GR  -  Grey 

COMPETITION Shift-Knob

 

 

The Competition Shift-Knob is made of 100% aluminum in silver, grey and matte black colors, being 105mm long and 35mm wide. Its installation is universal and is fixed by 2 built-in screws.

 

COM-PR  -  Black

COM-CZ -  Silver

COM-GR  -  Grey 

CLUB SPORT Shift-Knob

 

 

The CLUB SPORT Shift-Knob is made of 100% aluminum in Black, Graphite and Gray and is 80mm long and 44mm wide. Its installation is universal but recommended for vehicles with a trigger for reverse engagement.

 

CLU-PR  -  Black

CLU-CZ -  Silver

CLU-GR  -  Grey 

PARACHUTE LEVER

 

 

The Lotse Parachute Lever is produced 100% in aluminum and designed in a way that has very low weight. Its clamp was made for fixing to the tubes of Santo Antonio with 38mm of diameter, required in regulations

 

ALV-PR  -  Black

ALV-DR  -  Gold

COMPETITION Shift-Knob with Botton

 

The Competition shift-knob has this version with a push button, indicated for the VW line, because the lever is leaked, facilitating the passage of the cable. The Handle already comes with a cable attached to the button to facilitate installation. It is produced 100% in matte black aluminum, having 105mm length and 35mm width. 

 

COB-PR  -  Black

Hook Steering Wheel and Helmet

 

From the place of rest to your steering wheel and helmet. The Lotse Hook is produced 100% in aluminum, with fine finish and anodizing.

Its clamp was made for fixing to the tubes of Santo Antonio with 38mm in diameter, which are those required in regulation.

 

GAN-PR  -   Black

HARD Pedals

 

The Hard Pedal is a Universal accessory made in Aluminum, intended for vehicles with 3 pedals. Its fixation is made by screws that accompany the product, directly on the original pedals of the car.

 

The Product's main function is to optimize the adhesion of the feet to the car pedals. In addition, it guarantees durability in severe track use, where the original rubber pedals end up not resisting.

 

HAR-PR  -  Black

HAR-CZ  -   Natural Aluminium

SPACER

 

The spacer flange is intended to increase the distance between the steering wheel and the vehicle panel when required, usually for vehicles where the handwheel handle is too close to the arrow controls. It is 20mm thick and is made of Nylon.

 

ESP-PR 

ADAPTER to Logitech G27 Steering Wheel

 

The adapter flange for G27 aims to make it possible to install Lotse Steering wheel on the G27 Steering Wheel, thus transforming the equipment into a perfect simulation of a Real Steering Wheel for Virtual Automobile. It is composed of 3 parts to ensure a perfect alignment of the steering wheel and allow the passage of bios to buttons for the interior of the body of the G27.

 

FLG-27

BOTTON PLATE

 

The Button Plate is an accessory for those who need to add more buttons to the Lotse steering wheels. It is made of aluminum and comes with 2 buttons. This product also allows the installation of 4 buttons, using two plates mounted in parallel.

 

PBO-PR

COMPETITION BUTTON

 

 

The Competition Button is the same as most Competition steering wheels. Its body is 12mm in diameter and 38mm in length.

 

BOT-CO

DRAG RACE BUTTON

 

 

 

The Two-Step Aluminum Button is built for Drag Races, where the Two Step button requires high mechanical resistance. Must be mounted in 12mm holes.

 

BOT-AL

TWO-STEP LIGHT BUTTON WITH CABLE

 

 

This is a version of the Two-Step Button, already complete for installation.

 

In addition to the button, the product has a 2-way coiled cable, ready to receive a connector or be connected to the car system.

 

BOT-LA

DRAG RACE BUTTON AND CABLE

 

 

 

This is a version of the Two-Step Button, already complete for installation.

In addition to the button, the product has a 2-way coiled cable and a water-resistant connector.

 

BOT-AC

SPIRALED CABLE 2 WAYS

 

The Spiral Cable Lotse offers a set of buttons and keys, whether of the Lotse line or not. It has 250mm long recessed, reaching 800mm stretched. The spiral cable facilitates installation and electrical operation, allowing rotation of the hub when weeding the Steering Wheel.

 

CAB-2V

SPIRALED CABLE 5 WAYS

 

The Spiral Cable Lotse offers ease in installation of up to 4 drives, has 250mm length collapsed, reaching up to 800mm stretched. The spiral cable facilitates the installation of buttons and butterflies, helps in the electrical organization and allows rotation around the hub when weeding the Steering wheel.

 

CAB-5V

SPIRALED CABLE 5 ways with Plug

 

The Spiral Cable with PLUG has exactly the same characteristics as the single cable (above). With the great facilitator to accompany Plug Male and female already installed. The cable plug has a latch so that it does not come loose with vibration.

 

CAB-PL